|
MC101 |
Features
- Independent and simultaneous operation of up to three motors
- Programmable acceleration and deceleration rate
- PWM signal generation with programmable period and pulse width
- Independent choice of stepping/PWM mode for each channel
- 30V open collector outputs allows connecting to most stepping motor drivers and power amplifiers
- 8 digital input channels, 8 digital output channels
- DIP switch selectable I/O address range
- Crystal based timing
- On-board 8031 microcontroller
- Driver for Real Time Toolbox for MATLAB included
Applications
- Precise X-Y-Z position control
- Precise rotation control
- Pulse width modulation control
- Automation and control systems
- Robotics
Specifications
- Controller Outputs
| Channels: | 3 |
| Stepping mode: | step rate 1 to 8191 pulse per second |
| 1 to 32767 steps per command |
| emergency input for each channel |
| step/direction open collector outputs |
| PWM mode: | period and pulse width up to 13 ms |
| 200 ns resolution |
| open collector outputs |
- Digital I/O
| Input lines: | 8, TTL compatible |
| Output lines: | 8, TTL compatible |
- General
| Power consumption: | 600 mA @ +5 V, 100 mA @ +12 V |
| Operating temperature: | 0 to 50 °C (32 to 140 °F) |
| Connector: | DB-37 |
| Interface: | ISA |
| I/O ports: | 4 consecutive addresses |
|
